Frecon Plus Series

Up to 35% energy saving with variable speed and directly coupled drive system. Oil injected rotary screw compressor. Responds to all requirements between 5.5 kW and 315 kW. For special requirements please call us.

Categories: ,

Full product specifications

pdf ikona

Models and Technical Information

Model Pressure Capacity* Motor Power Connection Size Receiver Volume/Dryer Model Dimensions (mm) Weight Noise**
bar psi Minimum m3/min – cfm Maximum m3/min – cfm kW/HP Length Width Height kg dB(A)
FRECON 5 PLUS 7.5 110 0.38 11 1.03 32 5,5/7,5 G 1/2″ 200-250L 1025 650 950 235 69
10 145 0.37 10 0.83 27 HRD 30
13 190 0.36 14 0.64 23
FRECON 7 PLUS 7.5 110 0.42 14 1.4 42 7,5/10 G 1/2″ 200-250L 1025 650 950 255 70
10 145 0.43 13 1.2 35 HRD 40
13 190 0.43 12 0.95 29
FRECON 11 PLUS 7.5 110 0.77 27 1.8 64 11/5 G 3/4″ 500L 1175 730 1000 305 69
10 145 0.81 29 1.61 57 HRD 40
13 190 0.74 16 1.3 46
FRECON 15 PLUS 7.5 110 0.99 35 2.85 101 15/20 G 3/4″ 500L 1175 730 1000 345 71
10 145 0.97 34 2.33 82 HRD 50
13 190 0.99 35 2.07 73
FRECON 18 PLUS 7.5 110 1.1 37 3.5 124 18,5/25 G 1″ – 1275 850 1465 465 71
10 145 1 36 3 106
13 190 1.1 38 2.6 92
FRECON 22 PLUS 7.5 110 1.3 32 4.2 140 22/30 G 1″ – 1275 850 1465 500 71
10 145 1.3 32 3.8 124
13 190 1.2 29 3 99
FRECON 30 PLUS 7.5 110 1.22 43 5.3 187 30/40 G 1 1/4″ – 1575 1030 1750 695 71
10 145 1.22 43 4.6 162
13 190 1.21 43 4 141
FRECON 37 PLUS 7.5 110 1.3 46 6.8 240 37/50 G 1 1/4″ – 1575 1030 1750 715 71
10 145 1.3 45 5.8 205
13 190 1.3 44 5 177
FRECON 45 PLUS 7.5 110 1.3 46 7.6 268 45/60 G 1 1/4″ – 1575 1030 1750 945 73
10 145 1.2 43 6.8 240
13 190 1.2 44 5.9 208
FRECON 55 PLUS 7.5 110 2.5 88 9.9 350 55/75 G 1 1/2″ – 2000 1200 1810 1290 75
10 145 2.4 84 8.2 290
13 190 2.6 91 7.4 261
FRECON 75 PLUS 7.5 110 2.6 91 12.9 456 75/100 G 1 1/2″ – 2000 1200 1810 1390 77
10 145 2.5 88 10.9 385
13 190 2.5 88 9.6 339
FRECON 90 PLUS 7.5 110 6.2 220 16.8 593 90/125 G 2″ – 2500 1400 2037 2020 78
10 145 6 213 14.4 509
13 190 6.2 221 12.3 434
FRECON 110 PLUS 7.5 110 6.63 234 20.1 710 110/150 G 2″ – 2500 1400 2037 2380 78
10 145 7.11 251 17.3 611
13 190 7.04 249 15 530
FRECON 132 PLUS 7.5 110 6.9 244 24.3 858 132/180 G 2 1/2″ – 2750 1805 2000 2555 78
10 145 6.8 239 20.3 717
13 190 9.74 344 18.1 639
FRECON 160 PLUS 7.5 110 6.8 239 28.2 996 160/220 G 2 1/2″ – 2750 1805 2000 2760 78
10 145 7.13 252 24.6 869
13 190 8.5 299 21.7 766
FRECON 200 PLUS 7.5 110 14.03 495 37.5 1324 200/270 DN80 – 3250 2250 2450 4460 79
10 145 13.9 490 32.3 1141
13 190 13.81 488 28.8 1017
FRECON 250 PLUS 7.5 110 13.6 479 45.2 1596 250/340 DN100 – 3250 2250 2450 5600 79
10 145 13.51 477 38.5 1360
13 190 13.5 475 33.5 1183
FRECON 315 PLUS 7.5 110 13.2 466 54.1 1911 315/430 DN100 – 3250 2250 2450 6000 79
10 145 13.23 467 44.3 1564
13 190 12.93 457 38 1342
 

General Information

FreconPlus

FRECON PLUS 5P / 7P / 11P / 15P / 18P / 22P / 30P / 37P / 45P / 55P 75P / 90P/ 110P / 132P / 160P / 200P / 250P / 315P
Removable acoustic canopy & rigid base plate PLC control unit with LCD panel
Aluminum combi-cooler for oil and compressed air with Bar/Plate system Four-way thermostatic valve Silent and effective axial fan Variable speed drive (VSD) fan motor (except FRECON 5-22 PLUS and water cooled models)
Featured with three control block units, a solenoid valve and a control cylinder Low maintenance intake system Two stage air intake filter system
Progressive type, deep bedded and meshed separation layers High performance design with three-stage separation Low oil carryover ≤ 3 ppm
High efficiency 400V/3 phase/50Hz IE3 classIP55 electric motor Direct-drive system with flexible coupling VSD drive with heavy-duty frequency converter
New generation rotary screw air end with high capacity efficiency, durability and low energy consumption New generation bearing design with high load carrying capacity New rotor profile decreasing air leakages and required torque values
Energy savings up to 35% Constant pressure Wide working pressure range Soft starting Virtually infinite starts Prevent from negative effect of current peaks Effective air supply even in high fluctuation of air demand
Water cooling system Heat recovery system Cold start Water separator with automatic drainage system Power supply options other than 400V/3 phase/50Hz Food grade lubricant for food production need to add other features
Featured with three control block units, a solenoid valve and a control cylinder Low maintenance intake system Two stage air intake filter system

Reviews

There are no reviews yet.

Be the first to review “Frecon Plus Series”

Your email address will not be published. Required fields are marked *

Related products

HBP Series

TRX

TRA

T2